And so my term ends .... I am and always will be grateful for the opportunity Lynnda gave to me for my very first time on a Design Team but I will not be a stranger to the inkspired site and will continue to blog on my own Blog page.
Oak House Studio products are a definite favourite of mine and I will also continue use them and spread the word of how good they are actually are, so many out there haven't heard of Oak House Studio or if they have they don't have the products so let's all take the time to spread the word .....
I firstly inked through the holes which I had taped into place using the green ink pad and a blender, take off the paper but just put it to one side whilst you wait for the ink to dry. No replace the stencil obviously not lining up with the previous inking but don't worry if you do get an overlap now using the red ink repeat the process. When Dry I used a spray glitter to add a bit of bling.
On the inside of the box repeat the colour scheme but just randomly ink with bubble wrap to add colour to the inside of the box.
Line with tissue paper of choice, I like to scrunch mine up but you may choose to fold yours or to shred it.
Finally fill with your gift and either add a tag or wrap and make a card to go to the recipient.
This was made for the Lovely Lynnda Worsnop who gave me my first time experience of working on a Design Team. I have to say I have found it not only a very enjoyable time but I have learned lots and have come to love all the products in the Oak House Studio range.
And a selection of Glitter Glue for baubles and swags.
Stamp the Tree using the Forest Green ink pad, and in Lemon Yellow for the star. Paint the star using the gold Acrylic Ink, then using the Malachite Acrylic Ink paint the tree using small strokes of a fine paint brush. For the trunk of the tree blend acrylic inks to make brown.
Spray the background of the tree using a choice of the bottled ink colours that you like, you can either mask the tree or use a piece of kitchen roll to take the colour off the tree before it dries. I finally allowed the gold to almost dry and then using downward strokes of the kitchen roll take off the excess ink to leave a sparkly finish in places to the tree.
Finally stamp the sentiment I used a Fired Brick ink pad for this. Then mount onto a piece of card of your choice. When this is done take the glitter glue to decorate your tree.
Firstly I cut a blank piece of card and rounded of the 2 corners to fit inside a blank 8 x 8 scallop edged card. Tear the vellum to make hills, stick onto card. Use a wet wipe dipped into the powder blue and slate grey ink pads then randomly dab onto card turning in the fingers to fill the sky area. Then take the Beech tree and stamp onto card, then I used the Oak to stamp the other trees. Add the fluffy stuff and heat to make snow, then apply the stickles to the fluffy stuff but do not cover completely. Leave to one side to dry.
Take a piece of stamping card and cut to fit inside the card comfortably leaving room on the left hand side to allow for access to put photographs in.
Leave a half inch border all round and cut out the centres using a craft knife or die cutting machine if you have one. Do not glue the acetate in place until you have decorated the frame using inks in spray bottles and then stamp on top once dry,
Take the acetate and using a double sided tape apply to frame. Using the foam tape apply it to the top, middle and bottom borders of frame and to the right hand vertical side of frame do not put any down the left hand or middle vertical borders. Line up carefully and stick to the inside of the card. Then put the stamped front onto the card using glue.
I checked the aperture was ok and stamped onto a scrap of card to check the fit for the photographs that this card was requested for.
This card was a bit of a challenge for me as I had never made anything like it before but I think it has worked quite well all things considered.
The Big Christmas Collection of stamps is on special offer this week at Oak House Studio and a very useful set of stamps it is too !
other items include a piece of contrast card, copy paper, a make up sponge and a wet wipe.
Take the White card, tree stamp and Colbalt blue ink pad, stamp first tree straight from the ink pad, ink up the stamp again stamp onto a piece of scrap paper then place the stamp slightly back and up and to the right of the first tree using the second generation of ink. Repeat this again in the centre and then to the forefront of the card taking the second generation off the page for the last image.
Tear your copy paper to make hills and then using the make up sponge or if you don't have a make up sponge use something similar to make a rounded shape in between your fingers and thumb. Place your torn paper with just the base of the tree showing and using your powder blue dab ink along the edge and pulling the ink toward the base of the card to give a grounding for the tree and a hilly terrain. repeat in the same way for all the trees, then add some hills to the back of the trees and some little hillocks to the fore just for good effect.
Next step is the sky, take your wet wipe and scrunch it up to make a pad between your thumb and 2 fore fingers then dab onto your powder blue and loose some of the ink on your piece of scrap paper you don't want to much colour. Dab this lightly and randomly in the sky area down to the horizon twisting and turning your hand whilst doing so, when you feel it is enough use the same piece of wipe and go straight into the slate ink pad again loosing some of the colour on the piece of scrap, go over the blue to give a really moody feel to the sky. ( Try not to press to hard as this will make your card ripple with the moisture from the wipe.)
The next step is to add the fluffy stuff randomly into the sky to give the snowy effect and to also give the illusion of snow on the ground you will just need to follow the terrain here and there too but don't squeeze the bottle to hard as this expands when it is heated, to get an idea of how much try a little on your piece of scrap first. Heat until it fluffs up nicely and then put to one side. If you don't want such an obvious display of snow and prefer a more subtle approach then use a white fine line paint pen.
I used an A5 card for mine and trimmed a contrast colour or a piece of black card to make a matt then trimmed the artwork down to fit with a border showing.
I used this technique at my first workshop and the results speak for themselves:
Not at all different from the original really are they ? Considering 3 of them had never stamped before this workshop I think they did very well.
Someone did ask if it was ok to use glitter on the card ? Of course it is just spray the artwork before mounting onto your card .....
Thank you for looking and if you leave a comment I will definitely pass it on to all concerned xx
Firstly stamp the frame onto the Acetate and leave to dry.
Next take the black glossy card stamp fireworks randomly using the versamark.
Using a dry paint brush take the mica powders and lift a little of the colours you have selected and tap a little of each colour in no particular order over the stamped images. Then using a very soft brush dust the colours over the images to colour the fireworks. Tap off the excess powder and buff with a soft tissue.
Returning to the frame I used a white fine line marker to colour the frame and leave to dry completely once again, when done apply the double sided foam tape and cut of the excess acetate from the frame. Choose an area of the firework artwork that you are happy works in the frame and stick the frame to it. Cut the excess black card off so it is not showing outside the frame.
Take a card of your choice and stamp with Archival ink (black) Then write in squares Remember, Remember the fifth of November.
Next take the Acrylic Inks and shake the silver well and put a little onto a white tile, then a little citrine add some of the silver and colour the empty squares. Then I added a little Malachite to the citrine and silver to make a very pale shade of green and then graduated the colour all around the card using the 3 inks.
If you go over the black of the frame don't worry as when you go over the letters again in the black fine line marker you can colour it back in.
Mount the frame onto a piece of card from your craft stash and stick to card.
This is a fairly simple card I just used a large post it to mask off the centre of the card then taking the Colour Chemistry ink pad in Sea Blue and taking The Harlequin stamp and using the main stamp fill in and match up as much as possible then fill in the gaps with the single diamond.
Take the Beautiful Rose Stamp and stamp into the area that was masked off with the post it then using water and a very fine brush drag in the colour from the inked image. I used the Colour Chemistry Dusky Rose and Green as Grass ink pads for this adding more colour with the brush straight from the ink pad if I felt it needed a darker shade.
To finish use a fine line marker to go round the inside edge of the Harlequin frame. I did this by eye using a wiggly line, finally I added a couple of paper roses.
I used only permanent inks in the making of this card.
Firstly using liquid inks on a blending tool with a felt pad. I chose 2 inks that I like, then randomly stamped the pad all over the acetate.
Then taking the stamps of my choice from the oakhousestudioBig Christmas Collection and using an Archival Jet Black ink pad stamped over the top of the dry ink, allowing it to dry slightly before taking a dry cloth or tissue and wiping the ink off.
Use the Stazon ink pads to stamp the front of the acetate.
I have used the permanent ink technique before but until a couple of days ago had never stamped on the same side as the inks before wiping off but all credit to Kim Reygate for sharing this idea on Facebook. I love the effect it gives and hope you do too.